TOP CATEGORIES
SALE PRODUCTS
# 0 Hand Tools for (1/4”) Sheet-Metal Grommet and Plain Washer, Included Cutter and Cutting Teflon
$28.00 – $50.78
Micron hand tools are made of high quality stainless steel material, allows you to install your sheet metal and plain washers easily. Remember to use a plastic mallet, not a steel hammer. Supplied with full instructions.
Your hand tool 4pcs sets Includes : 2pcs setting , 1pcs cutter and 1pcs cutting Teflon board.
Material: High quality stainless steel
Size: The product is available in 9 sizes.
#0 (1/4”) Hole Piercing Dies
$22.50
Micron's high quality hole-piercing dies are only compatible with the TEP-3, M-3, DEP-2, PL-10 and MC-20 fastener attaching machines.
Perfect for pre-punching holes into various materials. Please be sure to choose the corresponding setting dies (same number) when ordering. Top shaft is ¼” threaded.
Please see our size chart for all available sizes.
Dies are final sale, and cannot be returned NO EXCEPTIONS.
#0 (1/4”) Sheet Metal Grommet Dies With Hole Piercing Die
$65.00 – $74.78
Set sheet metal grommets quickly and efficiently with Micron’s industrial die sets. These dies do the same job as a 4 piece set by combining features from the cutter and setting dies. The die first punches the hole in the material on the first pass, then sets the grommet on the second pass. This eliminates the need to swap dies or run concurrent machines.
√ 3/8 inch smooth top stem, 3/4 inch smooth bottom stem.
√ Compatible with the PL-10 fastener attaching machine, intended only for sheet metal grommets.
√ These dies are compatible with Stimpson and Scovill grommets.
Please see our size chart for all available sizes.
Dies are final sale, and cannot be returned NO EXCEPTIONS.
#0 (3/16”) Self-Piercing Grommet Dies
$38.95 – $72.05
This 2 piece set is designed to work with the TEP-1, TEP-3, M-3, PL-10 and MC-20 fastener attaching machines.
This dies is designed with a spring action to grip the grommets and hold in place for easy installation and has a threaded ¼” top shaft to work with Micron make machines which can be adapted to be compatible with other major make machines.This setting dies set is specifically designed to set self-piercing grommets. Our dies sets are made of stainless steel for a durable, long lasting usage.
These dies are compatible with Stimpson and Scovill grommets, however will need adapters to work on their machines.
Dies are final sale, and cannot be returned NO EXCEPTIONS.
#0 (9/32”) Hand Tools For Rolled-Rim Grommets and Spur Washers
$76.56 – $119.66
Micron hand tools are made of high quality stainless steel material, allows you to install your Rolled-Rim Grommets & Spur Washers easily. Remember to use a plastic mallet, not a steel hammer. Supplied with full instructions.
Your set includes; 2 piece setting Hand Tools, cutter and cutting teflon included.
Material: High quality stainless steel
Size: The product is available in 9 sizes.
SPECIAL OFFER
New
- New
- FEATURED
- TOP SELLERS
Load previous products
Load next products
MOST POPULAR
Cum cubilia ac fringilla lorem
quis himenaeos velit.
quis himenaeos velit.
1.
Home Delivery.
The European languages.
2.
Order As a Gift.
Donec odio etiam sceles.
3.
High Quality.
Curabitur hac hac maece.
4.
Buy With Joy.
Ullamcorper magna nec.
FOR TRAVELERS
New
- New
- FEATURED
- TOP SELLERS
Load previous products
Load next products
SALE PRODUCTS
# 0 Hand Tools for (1/4”) Sheet-Metal Grommet and Plain Washer, Included Cutter and Cutting Teflon
$28.00 – $50.78
Micron hand tools are made of high quality stainless steel material, allows you to install your sheet metal and plain washers easily. Remember to use a plastic mallet, not a steel hammer. Supplied with full instructions.
Your hand tool 4pcs sets Includes : 2pcs setting , 1pcs cutter and 1pcs cutting Teflon board.
Material: High quality stainless steel
Size: The product is available in 9 sizes.
#0 (1/4”) Hole Piercing Dies
$22.50
Micron's high quality hole-piercing dies are only compatible with the TEP-3, M-3, DEP-2, PL-10 and MC-20 fastener attaching machines.
Perfect for pre-punching holes into various materials. Please be sure to choose the corresponding setting dies (same number) when ordering. Top shaft is ¼” threaded.
Please see our size chart for all available sizes.
Dies are final sale, and cannot be returned NO EXCEPTIONS.
#0 (1/4”) Sheet Metal Grommet Dies With Hole Piercing Die
$65.00 – $74.78
Set sheet metal grommets quickly and efficiently with Micron’s industrial die sets. These dies do the same job as a 4 piece set by combining features from the cutter and setting dies. The die first punches the hole in the material on the first pass, then sets the grommet on the second pass. This eliminates the need to swap dies or run concurrent machines.
√ 3/8 inch smooth top stem, 3/4 inch smooth bottom stem.
√ Compatible with the PL-10 fastener attaching machine, intended only for sheet metal grommets.
√ These dies are compatible with Stimpson and Scovill grommets.
Please see our size chart for all available sizes.
Dies are final sale, and cannot be returned NO EXCEPTIONS.
#0 (3/16”) Self-Piercing Grommet Dies
$38.95 – $72.05
This 2 piece set is designed to work with the TEP-1, TEP-3, M-3, PL-10 and MC-20 fastener attaching machines.
This dies is designed with a spring action to grip the grommets and hold in place for easy installation and has a threaded ¼” top shaft to work with Micron make machines which can be adapted to be compatible with other major make machines.This setting dies set is specifically designed to set self-piercing grommets. Our dies sets are made of stainless steel for a durable, long lasting usage.
These dies are compatible with Stimpson and Scovill grommets, however will need adapters to work on their machines.
Dies are final sale, and cannot be returned NO EXCEPTIONS.
#0 (9/32”) Hand Tools For Rolled-Rim Grommets and Spur Washers
$76.56 – $119.66
Micron hand tools are made of high quality stainless steel material, allows you to install your Rolled-Rim Grommets & Spur Washers easily. Remember to use a plastic mallet, not a steel hammer. Supplied with full instructions.
Your set includes; 2 piece setting Hand Tools, cutter and cutting teflon included.
Material: High quality stainless steel
Size: The product is available in 9 sizes.
FAVORITE GARDEN
Many desktop publishing and
web page editors now.
web page editors now.
#0 (1/4”) Sheet Metal Grommet Dies With Hole Piercing Die
$65.00 – $74.78
ALL FOR GARDEN
New
- New
- FEATURED
- TOP SELLERS
Scelerisque fusceNew Arrival of
New Arrival of
Modern Garden Gloves.
A nec augue
Discount 30% Garden Equipment.
FURNITURE CATEGORIES
You must select your brand attribute in Theme Settings -> Shop -> Brands
SPECIAL OFFER
New
- New
- FEATURED
- TOP SELLERS
# 0 Hand Tools for (1/4”) Sheet-Metal Grommet and Plain Washer, Included Cutter and Cutting Teflon
$28.00 – $50.78#0 (1/4”) Sheet Metal Grommet Dies With Hole Piercing Die
$65.00 – $74.78#0 (3/16”) Self-Piercing Grommet Dies
$38.95 – $72.05#0 (9/32”) Hand Tools For Rolled-Rim Grommets and Spur Washers
$76.56 – $119.66#0 Hand Tools for (1/4”) Sheet-Metal Grommet and Teeth Washers
$32.00 – $56.70#0 Paper Eyelet Setting Dies
$38.95 – $56.28#0 Rolled Rim Grommet Dies With Hole Piercing Die
$75.00 – $101.10Load previous products
Load next products
OUR BLOG
22
Jun
Minimalist Japanese-inspired furniture
-
Posted by
admin
- 0 comments
16
Jun
New home decor from John Doerson
-
Posted by
admin
- 0 comments
16
Jun
The big design: Wall likes pictures
-
Posted by
admin
- 0 comments
14
Jun
Sweet seat: functional seat for IT folks
-
Posted by
admin
- 0 comments